Quick Answer
Most domestic EICRs take between one and four hours. A small flat typically takes one to two hours. A standard three-bedroom house usually takes two to four hours. Larger homes, HMOs, and commercial premises can take four to six hours or longer.
Time by Property Type
| Property Type | Typical Duration |
|---|---|
| Studio or one-bedroom flat | 1 to 2 hours |
| Two to three-bedroom house | 2 to 4 hours |
| Four or more bedroom house | 4 to 6 hours |
| HMO | 4 to 6 hours or more |
| Small commercial unit | 4 hours to a full day |
| Large commercial or industrial site | A full day or more |
These ranges assume straightforward access with no major faults found along the way. Real appointments can run shorter or longer depending on the factors below.
What the Electrician Actually Does
An EICR combines a visual inspection with live and dead testing. The electrician checks the condition of the consumer unit, tests every circuit, checks earthing and bonding, inspects sockets and switches, and tests RCDs where fitted. Every step is documented, which is part of why the process takes longer than a quick visual glance.
What Speeds the Inspection Up
- Clearing furniture and belongings away from sockets and the consumer unit in advance
- Making sure someone is home to provide access to every room, including lofts and outbuildings
- Having your previous EICR and any remedial certificates ready to show the electrician
- Labelling or knowing the location of your consumer unit and any additional distribution boards
What Slows the Inspection Down
- A painted-over or hard-to-reach consumer unit
- Furniture blocking sockets or switches
- Multiple consumer units in converted properties or HMOs
- Older wiring that needs more careful assessment
- Missing keys or access to outbuildings, garages, or lofts
How Long Until You Get the Report?
The inspection itself is only part of the timeline. Most electricians issue the written EICR within 24 to 72 hours after the visit, though some same-day services exist for an added fee. If the result is unsatisfactory, remember that the 28-day clock for remedial work starts from the date of the inspection, not the date you receive the written report. See our guide on what happens if you fail an EICR for the full process.
Booking Enough Time
When booking, tell the electrician your property type and roughly how many bedrooms, bathrooms, and outbuildings it has. This helps them block out a realistic slot rather than underestimating and having to return for a second visit, which can delay your compliance timeline unnecessarily.
What Happens on the Day of the Inspection
The electrician usually starts with a short walkthrough of the property, then works circuit by circuit. Power is switched off in sections while each circuit is tested, not for the whole house at once, so most rooms stay usable while the work goes on. The electrician will take photos and notes as evidence for the report, and may ask you about any known problems, such as sockets that trip or lights that flicker. Tenants can normally stay in the property during the visit, but it helps to keep children and pets out of the rooms being tested and to warn anyone working from home that the Wi-Fi router may go off briefly when its circuit is tested.
What Happens If Faults Are Found
Every observation on an EICR carries a code. C1 means danger is present and immediate action is needed. C2 means the installation is potentially dangerous and urgent remedial work is required. FI means further investigation is needed before the electrician can judge the issue. C3 is an improvement recommendation, not a failure on its own. If the report contains any C1, C2 or FI codes, the result is unsatisfactory, and the 28-day clock for remedial work starts from the date of the inspection, not the date you receive the written report. Once the remedial work is done, the electrician should confirm it in writing. Our EICR checklist for landlords explains what a satisfactory report looks like, and our guide to how often you need an EICR covers when the next inspection falls due.
Does the Property Need to Be Empty?
No. An EICR can be carried out while tenants are living in the property, and most landlords arrange it that way. The main thing to plan for is access: every room, including locked bedrooms, lofts, garages and outbuildings, needs to be reachable on the day. If a room cannot be opened, the electrician records it as a limitation on the report, which weakens the inspection and can cause problems with insurers or enforcement. For vulnerable occupants, agree the visit time in advance and confirm how long the power will be off in each area, so nobody is caught out by a dark hallway or a cold house in winter.
Frequently Asked Questions
How long does an EICR take for a flat? Usually one to two hours for a studio or one-bedroom flat.
How long does an EICR take for a house? A standard two to three-bedroom house typically takes two to four hours. Larger houses can take four to six hours or more.
How long after an EICR do you get the report? Most electricians issue the written report within 24 to 72 hours of the inspection.
Does a bigger house always take longer? Generally yes, since more rooms mean more circuits and sockets to test, though access and wiring age matter just as much as size.
Can I speed up my EICR appointment? Yes. Clearing access to sockets and the consumer unit, and having previous certificates ready, are the biggest time savers.
This article reflects typical UK EICR practice current as of 2026. For guidance specific to your property, consult a qualified electrician registered with NICEIC or NAPIT.
